HIFI / Multimediaausbau 2006 Dokuthread von Benny

  • Ich schau nachher ma vorbei, ma schauen ob ihr noch am Basteln seid :) (ca. 22Uhr)

  • Zitat

    Original von def-shooter
    Wer machst das denn in WÜ?


    wenn du fast bis nbg fahren würdest wüsst ich jemanden der dir da was feines aus gfk basteln kann chris :)

  • @def - die jungs hier http://www.sound-garage.com/


    julian - ich glaube wir hatten dein auto auf der überwachungskamera gesehen - da biste schon wieder gefahren =)



    aber nun zum Thema - heute wieder Spätschicht:


    Die "Nase" sauber anspachteln & schleifen:
    [Blockierte Grafik: http://home.arcor.de/benny222/Umbau2006/step14.JPG]


    dann haben wir die untere Brücke noch etwas bearbeitet:
    [Blockierte Grafik: http://home.arcor.de/benny222/Umbau2006/step15.JPG]


    und dann halt noch bisserl gespachtelt und geschliffen:
    [Blockierte Grafik: http://home.arcor.de/benny222/Umbau2006/step16.JPG]
    [Blockierte Grafik: http://home.arcor.de/benny222/Umbau2006/step17.JPG]
    [Blockierte Grafik: http://home.arcor.de/benny222/Umbau2006/step18.JPG]

  • Zitat

    Original von RowdyBurns
    Ich sach mal so:


    Phääät! =) =)


    Wird der ganze Rotz dann nacher gelackt oder mit Leder bezogen oder wie?


    Hoffen wir mal auf lackierung =) wär sonst schade um die rundungen

    Gruß Kaufi,
    meinGOLF.de Moderator

  • wird natürlich gelackt - aber von den "styling-elementen" (brücken usw.) die geplant sind, sind ja bisher noch nichtmal die hälfte vorhanden =)

  • kann mir gar net vorstellen was da noch alles rein soll an brücken :D
    aber jetzt gehts ja vorran!!!


    ot:
    ich war gar nicht da :D
    hatte keine zeit mehr ;)

  • 8o 8o 8o Oh mein Gott, da bleibt einem ja die Spucke weg! 8o 8o 8o

  • Scheint ein Equalizer zu sein!?

    Rockford Unveils New Signal Processor


    Rockford Fosgate has done it again. It has introduced a new signal processor that improves not only the sound produced by an aftermarket system but also an OEM or factory system.


    Called the 3Sixty, this interactive processor has up to 156 bands of equalization and makes it easier to integrate aftermarket equipment with OEM. It also includes an auxiliary input for the inclusion of other car entertainment devices such as a video game or MP3 player.


    Actually, the 3Sixty combines common audio components into one unit. It allows for six channels of 1/3rd octave equalization and each channel has a 3-way crossover with selectable slope. The crossover can be adjusted between 50 Hz. and 10kHz. There is also a subsonic filter to protect the subwoofers that includes a selectable slope, delay and output level controls. The subsonic filter can be adjusted between 20 Hz. and 35 Hz.


    The six channel 1/3rd octave equalizer features a 31 band EQ for the left and right front, 28 band EQ for the left and right rear, a 28 band EQ for the center, a 10 band EQ for the subwoofer(s), and a 31 band EQ for the auxiliary input.


    Moreover, it includes software that analyzes the existing sonic signature coming from the factory source unit and automatically normalizes and/or sums the response to create a full range signal. It has the capability to visually show a before and after snapshot of the OEM sonic manipulation.


    Finally, the 3Sixty can be controlled by a Palm OS® device and the adjustments made by the Palm OS can be shown real-time on screen.


    http://www.rockfordfosgate.com

  • sag ma hällt die konstruktion da auch oder bricht dir das GFK zeugs bei der erst besten bodenwelle auseinander? ;)

  • aus gfk werden segelschiffe gebaut ;)
    und ein kumpel von mir hat auch schon die eine und andere stoßstange mit gfk gebaut das hält bombig ;)

  • hey julian,


    ich glaube du hast keine ahnung wie stabil das zeugs ist !? ;)


    ich würde ja wetten, dass du es nicht schaffst, eine dieser Spitzen durchzubrechen :baby:

    Einmal editiert, zuletzt von Benny ()

Jetzt mitmachen!

Drei Gründe dafür:
- Austausch mit VW Golf Fahrer
- Alles zu Versicherung & Finanzierung
- Tipps zu Bauteile, Tuning und Reparaturen

Registriere Dich kostenlos und nehme an unserer Community teil!