Beiträge von udsulle

  • Keine Fernlichtassistent nach dem Austauschen der BCM

    Hi Linx
    Just got the info that i need another BCM unit NOT = 1k0937087E Z29 but this supports Xenon and Light assistance 1k0937087k z07
    Do you know where to check if this is the right unit ?


    I´v got at body number from af Golf VI 2011 who has Xenon and Light assistance AB fabrik.
    Best regards and Merry X-mas :P


    Ulrik

  • Keine Fernlichtassistent nach dem Austauschen der BCM

    Google Translate.:
    Hallo. Ich habe mein Board BCM 086 bis 087 E ersetzt zu bekommen Highlights auf meine Xenon Installation. Aber nachdem ich geändert BCM verschwanden meine Fernlichtassistent?
    Ich verstehe es nicht, weil ich alle Codes aus dem alten Kasten kopiert haben, um den neuen BCM? Aber die neue BCM ist ganz neu, noch nie benutzt worden. Könnte es sein, dass ich in anderen Menüs müssen auf der VCDS Fernlichtassistent aktivieren?


    Im Voraus vielen Dank für Ihre Hilfe :)


    Mit freundlichen Grüßen,


    Ulrik



    ENGLISH.:
    Hello. I've replaced my BCM board from 086 to 087 E to get highlights on my Xenon installation. But after I changed BCM disapeared my beam assistant?
    I do not understand it because I have copied all the codes from the old box to the new BCM? But the new BCM is brand new, never been used before. Could it be that I need in other menus on the VCDS to enable beam assistant?



    In advance many thanks for your help :)


    Sincerely,


    Ulrik

  • Keine Zentralverriegelung nach dem Austauschen der neuen BCM-Modul :-(

    Hallo Linx and THX :) !!!
    Your was right again - after a re-coding i now got the lock system to work again ...... I´m very happy :-):-)


    Only problem now is my High beam assistent or Light assistence is gone after I installede the new BCM ?
    Perhaps i also need to code the Light assistance - but i took all the codes from my old and swap them all into the new BCM - so i dont understand why i dont have the light assistance on my MFA+ ????


    By the way.... what are you working on with your G6 in the garage ? :)



    Best regards Ulrik



    GOOGLE TRANSLATE.:
    Hallo Linx und THX :-)!
    Ihr wurde wieder nach rechts - nach einer Re-Kodierung ich jetzt habe die Lock-System wieder zu arbeiten ...... Ich bin sehr glücklich :-):-)


    Das einzige Problem ist jetzt mein Fernlicht Assistent oder Light Assistenz ist weg, nachdem ich den neuen BCM installede?
    Vielleicht brauche ich auch, das Licht zu Hilfe Code - aber ich habe alle Codes von meinem alten und tauschen sie alle in die neue BCM - so i dont verstehen, warum ich nicht das Licht Unterstützung auf meinem MFA + haben??


    By the way .... Woran arbeiten Sie mit Ihrem G6 in der Garage? :)



    Mit freundlichen Grüßen Ulrik

  • Keine Zentralverriegelung nach dem Austauschen der neuen BCM-Modul :-(

    Google Translate.:
    Hallo. Ich habe ein Problem, nachdem ich meine BCM Modul im Auto ersetzt, um hohe und niedrige Bi-Xenon bekommen, dann auch meine Zentralverriegelung nicht mehr :( Ich kann nicht gesperrt werden das Auto.
    Hat jemand die gehört / ausprobiert hat vor?


    Ich würde gerne davon hören.


    Im Voraus vielen Dank


    Regards Ulrik



    ENGLISH
    Hello. I have a problem after I replaced my BCM module in the car to get high and low Bi-Xenon, then so does my central locking system is not more :( I can not lock the car.
    Does anyone else who has heard / tried this before?


    I'd love to hear about it.


    In advance many thanks


    Regards Ulrik

  • Problem with Kufatec BI-Xenon on Golf VI

    Hi Linx
    Yes you are absolutely right. Sorry I had completely overlooked that you wrote 087 must be the model for my car. So many thanks :)


    My only worry now is that I'm a little unsure about my beam assistant will work ... and yet why should it not do it - so we must try and see what happens!
    But just in the end .... We agree that there are differences about the new BCM module 087 or 087+ (PLUS)? So it is not is completely irrelevant whether I get a 087 or 087+ ?


    In advance many thanks for your reply !


    Good weekend!


    Ulrik
    :rolleyes:

  • Problem with Kufatec BI-Xenon on Golf VI

    Hello Rexon.
    After thinking a lot about my problems with Xenon high light - then I think I am after your suggestion to replace my BCM module the same as your No. 1K0 937 087E but do you know if it also supports light assistant, parking assistant, etc .? Or is it just the way that this module you call HighEnd+ that it supports EVERYTHING :-)?


    PS. Do you have the full VW no.? becurse my VW dealer does not regonize this number. 1K0 937 087E (He says that he need som more letters ) ??


    Thanks


    And have a nice weekend :)


    Best regards Ulrik

  • Problem with Kufatec BI-Xenon on Golf VI

    Hi again Rexos
    This from your info can perhaps help me.:
    The autoleveling-Wireset have to be connected with the levelingsensor, with the Autoleveling-Controller [Adress 55], 1 cable with ground, 1 cable with ignition plus (clamp 15), 2 cables with CAN Low and CAN High and last but not least 1 calbe to the left headlight and the other to the right headlight. (linke in the install-guide)


    What PIN NO. on the headlights did you put the wires to the headlights ?


    Thanks Ulrik

  • Problem with Kufatec BI-Xenon on Golf VI

    Hi rexos!


    On the adapters from Kufatec - You must set PIN 1 and PIN 2 (they are gray color) and PIN4 (Black) But on my adapters from Kufatec the PIN4 is already taken ???
    Just today i went into all the installations again, just to check that i have done i correct. It is when im using the guide from Kufatec.


    But still !!!! I cant get HIGH beam and turn up/down Side to Sid on my headlights ???
    It seem that im missing som power on the headlights to get them working wint HIGH beam.


    Did you go into your fuse box with a black or purple wire ??
    I have a Black wire (dobble wire) from the fuse box up to both headlights - it meaning that the black goes to PIN4 but kufatec says that i dont need it ???

    Hope you can help :)


    Perhaps i can email you all my VCDS spec?


    Best regards Ulrik

  • Problem with Kufatec BI-Xenon on Golf VI

    Hi Linx and RustyCS


    Yes I did install a level sensor at the rear axle.
    All installations is done from Kufatec guide.


    Only problem I ran into, is that there is a black wire at both headlights from Kufatec wireset i dont need to use (what Kufatec says) So im a little worry
    My car have Light Assistance - can i be that who course the problems ?? I dont know ?


    We must see. Perhaps I take a trip to Kufatec in DE so they can fix my problems.



    I keep you posted :)


    Thanks


    Best regards Ulrik